Projects
Connected greenhouse kit
A guide that starts from zero and a complete program to measure air, soil and watering in a greenhouse — no cloud, no subscription.
Price 9 USDC
The proof
- 18 tests — OK
- Mesures en base serre : 120
- files : 2 (0 missing)
- The proof →
In this project
Documentation — Connected greenhouse kit
What the kit contains, prerequisites and procedure.
Proof — Connected greenhouse kit
What is actually executed for this project, recalculated when this page is built.
What you get
A 7-page PDF guide and 11 files: the Python collector code, the Grafana dashboard, the parts list, the systemd unit, and wiring examples. The guide starts from zero — you do not need a sensor already wired to follow it.
What it does
- measures air (SHT31: temperature, humidity), soil (DS18B20, humidity) and light (BH1750) ;
- publishes to MQTT, then writes to SQLite after rejecting out-of-range values — a failing sensor must not trigger a fake watering ;
- decides watering on an explicit rule, and cuts the pump on an empty tank, an out-of-window hour, or a silent collector ;
- shows a Grafana dashboard built on the data.
What it does not do
It does not run an existing installation turnkey: it gives you the method, the code and the settings, and you do the wiring. The relay is deliberately the last component in the guide, not the first.
Why the watering rule is the argument
The pump only starts when four conditions all hold: soil below threshold, tank full, inside the time window, and a delay elapsed since the last cycle. A missing sensor or an empty tank blocks watering. It is written down, tested, and it is the kind of detail that keeps a greenhouse from being flooded.
The rule, in real conditions
Dry soil, full tank, noon — the pump starts
commande
python3 decision.py --sol 20 --cuve 1 --depuis 900 --heure 12sortie
sol 20.0 % (seuil 25 %), cuve pleine, dernier cycle il y a 900 s
heure locale 12h00 (fenêtre 6h–21h)
conditions :
sol < 25 % : oui
cuve pleine : oui
dans la fenêtre horaire : oui
délai >= 600 s : oui
décision : POMPE ONWet soil — the pump stays off
commande
python3 decision.py --sol 80 --cuve 1 --depuis 900 --heure 12sortie
sol 80.0 % (seuil 25 %), cuve pleine, dernier cycle il y a 900 s
conditions :
sol < 25 % : non
cuve pleine : oui
dans la fenêtre horaire : oui
délai >= 600 s : oui
décision : POMPE OFFPreview of the guide
Free excerpt: the first two pages of the guide to read without buying anything. The rest is in the full guide.
Payment is peer-to-peer and irreversible. The guide does not replace an electrical installation: the pump and its supply run at 12 V, the Pi at 3.3 V, and never both from the same source.
documentation — prérequis, fichiers, marche à suivre. Mentions légales — paiement, livraison, conditions.